Paraglider Brake Handle

Brake handle for paraglider

Designed for advance alpa 6 brake, but should work with every type of brake

It's a press fit design, no need to untie your brake line.

Print instructions

3 perimeters
.2 or 3 mm layer height
20-30% infill (too much the handle is heavy, not enough it is brittle)

Go for PETG as it's for outdoor use

For 1 handle, print 2 of part1 and 2 of part2
I recommand printing 1 part1 with hole to link it to your brake

Fly safe