Prusa RC4 with Visor and Loops

In speaking with Doctors they wanted some modifications to the shield:

1. Visor for added face protection.
2. Wider shield for better coverage on the side of the face.
3. Ability to use materials found in the hospital for a strap.

We solved this by adding a front visor, made the shield 300mm wide, and then switched to loop straps so that tourniquet straps could be used.

Print instructions

Supports are not necessary.
Print with at least 3 perimeters, about 30% infill.

Ideally, print it from PETG.