Monoprice Voxel/Flashforge Adventurer Filament guide

I took mediaman's excellent filament guide, trimmed most of it off, and rotated the stem, to fit on jwnicholson's cover. I simply glued it on using Gorilla super glue. I tried to come up with a way to integrate it into the cover but couldn't find a way that wouldn't require loads of support, so why not keep it simple.

UPDATE 11-17-2019:
I realized the .stl file I uploaded was not the final version. It was a bit asymmetrical.

Print instructions

Resolution: 0.1mm

Infill: 10%

Notes:

I recommend printing with 0.1mm resolution as the tolerance between ball inside and the outer component is small.

Post-Printing

When you glue it on, make sure you leave enough space so that the ball inside the guide can rotate freely.

If you like what I'm doing…

 … consider buying me a coffee or joining my Club.