rubber band gun (no additional hardware) pen spring preferred

6 shot rubber band gun that is split up into 4 pieces (left,right,middle,trigger) then you have 4 big clips and 2 small clips to hold it together. Moved the spot that holds the bands on the snout... lowered for better function(same look essentially).You can put a rubberband in the middle for the trigger(2 size slots available for whatever bands you have) spring from a pen preferred.. works best! Print has tight tolerances so your printer should be tuned in! Assembly consist of putting the clips in the middle section first(2 small up top and the 4 bigger in the rest) and then putting one side on, then trigger and spring or rubber band in place, and then pressing the other side on. Send me a message if any problems happy to help

Print instructions

Recommend printing at .10 with 15% infill and 4 parameters because the curves and clips and text and tolerances but try what you want. I printed the clips in abs at 100% for flex and rigidity but did try pla and it worked too (abs preferred in case you need to flex the clip with pliers to make it easier to assemble) i did a layer color change at the grip hight to make a different color grip. All 3mf files are set up already that's exactly what i printed!