CandyLand Card Box

A box to store the cards for CandyLand, as well as discard into.

The box is sized to fit in the board game box, which limited the total height. Instead of two stacks (ready + discard), divided the cards into three stacks (2x ready + discard), so as play continues, you end up with (1x ready + 2x discard).

Print instructions

Flip candylandbox_lid.stl so the top is on the printing platform.

The lid was designed with a 0.1mm tolerance, so depending on your print quality, it should have a good fit -- just enough snugness to not be loose.

Note: cards are about 1 5/8" x 2 1/4"