Modern Vespa Key Holder

After a few days of testing, I removed the "work in progress" flag and updated the files to the final version.
Some improvements:

• two key version (ignition and top case) thinned by 5mm
• added a hooking point for accessories, such as carabiners or lanyards

• aesthetic improvements, as a profile that most evokes the Vespa style and the stylized reproduction of the Vespa GTS Super vent grid
  ##### Printing tips

  Print preferably with flexible filament such as ninjaflex or any other TPU/TPE. Better results you can have with zcory Rubber HS filament.
  If you use a stiff filament, most likely you will need to heat the self-locking M4 nut to insert it into its housing..

  To complete the double keys holder and the master key holder, you need an M4x25 allen bolt with a M4 self locking nut.
  The Single hey holder needs an M4x20 allen bolt with a M4 self locking nut.

Print instructions

Printer Brand: Zortrax

Printer: Zortrax M200

Rafts: Yes

Supports: Yes

Resolution: 0.15mm

Infill: 30% honeycomb

Notes:

Use only flexible filament.
Put some supports only under the hooking point.