Paramotor Strobe

Paramotor Strobe

Version 1 isn't as bright as I'd like. Checkout Version2

Flight video

https://youtu.be/buTca8\_QFGw

Video of strobes in action

Warning

• Use a 5 amp automotive fuze to prevent short circuits from causing a fire
• LiPo Batteries will swell when over-discharged, always use a battery checker and never let a lipo battery drop below ~3.5volts per cell
  Parts

• Strobes
• 12v regulator (large)
• 12v regulator (small)
• Fuse
• LiPo Buzzer

• JST connectors (optional)
  Print the parts in TPU or Flex material for best result.

  You can put 1, 2 or 3 strobes around most tubes on a paramotor frame. Tested with an Airconception Nitro 200 Delta frame.

  While you can use the connectors that came with the strobe kit, I opted to replace them with the red JST connectors since they are smaller and I didn't need all the connectors that were included.

  The strobe leds came with poor quality solder connections. I re-tinned all the solder joints.

  Box Attachment

The controller box doesn't have attachment points. You can glue these ziptie adapters to the box to allow for easier mounting.

https://www.thingiverse.com/thing:3525269

Power Switch

https://www.thingiverse.com/thing:3471327

Print instructions

Category: Sport & Outdoors