Ornamental Ball Spinner

• my best spinner design so far ;D
• based on D13mm stainless steel balls, which move freely inside their pockets for additional fidgeting
• 2 part design for easy color mixing and "3D" spinner contour, halfes should snap together easily
• includes my latest cap design for good grip without print support need
• needs 1x 608 skate ball bearing and 5x balls
• balls need to be put in place before spinner halfes are glues together
• caps will need some glue, depending on the print result fit

• model units are [mm]
  EDIT 09.06.2017 new stl models added:

• "_inch" for 1/2" (12.7mm) balls
  EDIT 02.07.2017 new stl models added:

• "_D12" for 12mm balls

Print instructions

Category: Mechanical Toys Print Settings

Printer Brand: Prusa

Printer: [Prusa Mk2]

Rafts: No

Supports: No

Resolution: 0.15

Infill: 30%

Notes:

• printed in DasFilament Bronze/Silver PLA
• used 2mm brim due to delicate parts and to prevent warping issues