This is a midcap designed for the M16A1 (will fit any M4/AR/M16 platform) for Vietnam based load outs, impressions, etc. Modeled 1:1 with a real period 20 round magazine, matched with an airsoft M4 midcap for functionality.
There are a few different files:
-The entire magazine to be printed all at once
-The entire magazine split into 2 sides with 3mm holes for dowels, glue, etc (screws will not fit into magwell)
-The spring tab which slots into the top of the magazine after the BB holder (use a small screw to hold it in place) ((the most forward part of this is designed to be trimmed completely off or in fractions to suit different lengths of spring used))
-The BB holder which slots into the top of the magazine in front of the spring tab (use a small spring between the two, a donor midcap spring works well)
This is not done, but works well so far. I need to print more versions and test them out. As far as I can tell, a hop up will engage the BB holder to release and feed BBs, but it might need to be moved 0.5mm higher. The 7mmx11mm inner channel will double stack BBs and should get capacity to 50-60 BBs depending on the feed spring, follower and surface finish.
Please print, test and report how they're working. Thank you!
Category: Sport & OutdoorsThe author marked this model as their own original creation. Imported from Thingiverse.