Yaesu FT897 Internal Battery trays

I designed these to fit 8 or 9 Li-Ion 18650 cells inside the FT897. I ended up with 8 cells, but left the extra space since its useful for wiring.

You will need a bunch of m3x16 and M3x8 countersunk screws. Can also use self-tapping.

I used a cute LED battery level indicator that I found online here

https://www.electromannsa.com/products/1s-8s-single-3-7v-lithium-battery-capacity-indicator-module-4-2v-blue-display-electric-vehicle-battery-power-tester-li-ion-blue-display

and a BMS that slots into the side of the tray https://www.electromannsa.com/products/4s-4amp-18650-lithium-battery-charger-protection-board?_pos=1&_sid=dbaec39d7&_ss=r

(you can probably get them online anywhere)

NB You do the installation and wiring of the cells at your own risk

Hey, please hit the LIKE button if you download it, that way I get some feedback, and if you truly love my work, you are welcome to tip the price of a coffee or a beer!

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

No

Resolution:

200

Infill:

38

Filament: PolyMaker PLA