UniFi PoE Injector Mount for Leviton Structured Media

A mounting plate for UniFi power over ethernet injectors for Leviton structured media panels.  Will accept up two PoE injectors.  Works with either the older or newer model that come with the access points.

Uses the Leviton push-lock pins, but you could use wood screws and a washer if the panel was mounted on plywood.

Needs the brackets that the injectors snap into, it should have come with one in the box. The brackets can be attached to this plate with ¼" #4 wood screws.

Fusion 360 file provided for modification. The file is parameterized to hopefully make it easier to change width and height if needed.

Print Settings

Printer: Ender 3 Pro w/ direct drive

Rafts: No

Supports: No

Resolution: 0.15-0.2mm

Infill: 15% or higher

Shells: 2+

Notes:

Doesn't need supports if printed flat with back on the build plate.