PJ masks lamp

Lamp with glow in the dark for the kids play room.

The flat catboy & gekko were bended afterwards with a heatgun (only heat the thicker area and do it gently to avoid to much wrinkling).

After heating lay it on the lampshade to apply the correct form.

Avoid glue in the very thin area's or they will be visible even without the light (speaking from experience...)

Assembly instructions:

• assemble the sealing-fixation first
• glue or melt the seal-cover, conduit & lamp-sealing together and put it over the electric cable. Fix this to the sealing fixation by sliding it over from the correct side.
• Now assemble the socket onto the wire, and put the bulb in.
• Assemble the outer shell et voila, you're done!

IMPORTANT:

Use an 8W LED bulb or less to avoid overheating of the cover.

Print Settings

Rafts:

No

Supports:

No

Resolution:

0.2

Filament:

glow in the dark, blue, green