NozzleTip SpinningTop

The NozzleTip SpinningTop!

The Spinning top that glorifies your nozzle after it has been a faithful servant! Don't throw it in the bin, just let it spin! 

You can finally do something fun with your old and worn-out nozzles!

This is my first design and I am a fusion360 amateur. I started work on this toy for the 1h print contest a couple of months ago but never had time to finish it. When trying the spinners out I was very happy with how much longer they go on spinning with the actual metal nozzle for a tip, happy printing^^

Print recommendations

• 0.15mm layer height for best result.
• 3~5 perimmiters with 100% Infill
• I have included a dummy nozzle that you can print if you want to use the toy without an actual nozzle.
•  The NozzleTip Saucer and DummyNozzle look better with some support. I suggest using snug supports at 17°~20° overhang threshold.
• It might be helpful to use a 7mm socket wrench to hold the nozzle in place as you screw on the handle.

 

(This toy can of course be used with fresh nozzles for decorative storage, but you should probably not spin with nozzles you intend to use later as that might damage them.)