RESIN UV CURING CHAMBER

These are the files for a 3D printed Resin UV Curing Chamber.

If you like this model consider becoming a Patreon: https://www.patreon.com/WF3Dprinting

The model is split in two pieces to fit on to a printer with a build volume of 25 x 21 x 21 cm or 9,84 x 8,3 x 8,3 in. (Example Prusa MK3)
All parts are rotated for optimal printing with minimal supports.

For assembly I recommend using 2x M4x30 mm screws, one smaller M3x15 mm screw an one magnet.

In addition you'll need mirror foil, a UV LED strip (3 m) and a solar powered lazy susan. Paint it as you desire. ;)

Use high % infill when printing otherwise the top layers may fail as they did for me.

You can also see a video about the build process right here: https://youtu.be/7SArh9Wjapw

Print instructions

Licence: Creative Commons - Attribution - Non-Commercial - Share Alike Category: 3D Printer Accessories