Holder for car charger NRGkick 32A

Holder to firmly secure your NRGkick charger on the wall while using it at home. With two simple snap hooks you can open it and take it for a ride if needed.

You will need 2 M3x30 bolts and 2 M3 threaded inserts (I used Ruthex inserts from Amazon)

I must admit it does not fit perfectly but due to the conical shape of the charger you can create a snug fit by getting the right distance between the 2 holders. 

Print settings

You will need supports on the hinges.  

I would suggest to use 0.2 mm layer height and 3 perimeters. Please use PETG for the clips, for the wall parts PLA should work too.