BIQU H2 Ender 3 V2 mounting plate with CR Touch

This remix version aims to make the extruder mount more secure. I've increased the dimensions of the top bracket and added some more brackets to the bottom (v2).

On the ABL mount I've cut out a slot on the top to make the wires fit for a CR Touch. I've also made a slot along the bottom for it's cables to route through (you may also get the fan cable through there).

I've also made room for an ADXL345 sensor on the top.

My print settings using the BIQU H2:

• Nozzle temp: 240°c
• Bed temp: 80°c
• NO cooling
• Retraction distance: 0.5mm
• Retraction speed: 6mm
• Print speed: 80mm/s (40mm/s wall speed)
• Nozzle size: 0.8mm
• Layer height: 0.4mm
• Line width: 0.8mm
• Infill: 50% Gyroid
• Walls: 4
• Top/Bottom: 4
• NO supports
  
   

Update: Added V2 (18 april 2022):

Added some more supports on the bottom. Changed the cable groove to fit the thermistor and heater cables (maybe).