Iwata Cup Cap

Iwata Cup Cap

A cup cap for an IWATA airbrush.

I bought my Iwata airbrush with a large-capacity cup and used an angle-grinder to cut it down to the size I preferred (mad, I know).  That meant that the cup cover didn't fit so I designed this cup dust cover for my particular needs.  Could be scaled (through trial and error, perhaps) to fit another airbrush cup.

Material:  PLA
Layer height:  0.1 mm
Supports and Brim:  None

The inside diameter of my cut-down cup is 23.16 mm.  No idea what the original cup size was.  A metal file and some 3000-grit wet'n'dry paper fixed any issues…

Regards, Paul