Thermostat restrictor (2 versions)

want to restrict selectable thermostat level? e.g. in your floor … this thing might be for you.

This fits for thermostat with “ribs” like shown in photos. I've made 2 versions for 2 types of thermostats. Type 1 is that shown in the cover photo, second type is the last picture. Difference is first is somehow straight and other is bend.

If you need a somehow different version, please let me know, I will see what I can do

Print instructions

• print it laying on the side, see pic for reference (important for strength!)
• use paint on support, see pic for reference
• PLA is good enough, PETg might be better
• 0.15 mm layer height
• 15% 3D honeycomb infill
• 3 perimeters
• same count of bottom and top layers (I have 5)

Installation

just slide it onto your thermostat inbetween the ribs. First time it could be a bit tight, perhaps file sides a bit.

Additional notes

I'm interested in your feedback to improve my stuff! So give me likes, post makes, comment and rate the print to show others and me how well it goes.
If you post a make, let me know which filament you use.

If you want to support me by donating a coffee go to https://ko-fi.com/antimaterie I would really happy about it. The money will be invested in all stuff regarding 3d printing to give more and better quality models.

In general my Prints are not for commercial use, but if you are a print farm owner and want to sell some of my stuff, please contact me.

Hope you enjoy my models.