Glassbed Corner Brackets for FlashForge Dreamer for 3mm Plates

All found models of brackets for FIashForge Dreamer for 3mm glass plates did not fit on my device.

Because the print bed of the Dreamer is wider than the 230mmx150mm glass plates the plates were not fixed safe on the bed and shifted around. The most of the found brackets were also too high.

So I made my own based on the idea of ADesigns.

Because the size difference of the plate to the print bed is higher in the depth than in the wide the brackets must be asymmetric.

The wider side (with the skewed corner) comes on the longer side of the bed (X-direction), the side without skew comes on the shorter side (Y-direction).

As to see in the photo now the brackets fit perfect for the plate.

Print Settings

Printer:

FIashForge Dreamer

Rafts: 

Doesn't Matter

Supports:

Yes

Resolution: 

0,1

Infill:

75%

Notes:

Use ABS because of the high environment temperature.
A high infill percentage increases the stability against deformation. Try the best infill rate for maximal stability and minimal warping.

How I Designed This

Designed with FreeCAD.

Category: 3D Printer Accessories