205mm Grit Guard

A grit guard sits in the bottom of your wash bucket in your wash solution.  It allows the dirt and debris that gets stuck to your wash sponge/mitt/towel to fall through the grate and rest in the bottom of your bucket preventing re-contaminating during your wash process.

There are plenty of 12" grit guards on the market but I needed a smaller one for a 2 gallon bucket used in a part of my detailing process.  This one is 205mm diameter which is just a hair over 8".  You can of course adjust proportions in your slicer to fit your needs.

I printed in PETG with 3 perimeters which makes it solid and it doesn't float.