Weho PSU mount for metal DIN rail clips

This is a bracket for mounting a WEHO WRS-250 power supply unit onto metal DIN rail clips like these here: https://de.aliexpress.com/item/32971006389.html

This is for mounting the PSU in landscape orientation onto a DIN rail. You need to print two of these and you best print them laying on the side for better part strength. Per bracket you also need 4 M4x6mm screws, 2 for mounting the bracket to the metal clip and 2 for mounting the clip to the PSU.

UPDATE: Added a modded bracket that gives you the option to attach the metal DIN rail clips in vertical or horizontal orientation. That way you can mount the PSU in vertical orientation on two DIN rails, if you prefer.

UPDATE: Dec. 5 2021: Added a touch protection enclosure for the wire connections to the bracket. This incidentally also fits on a MeanWell RSP-200-12. To attach the top cover to the base you need 4 each of M3 heat inserts (M3x4.8x5.0) and M3 screws (M3x8).

Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

Rafts:

No

Supports:

No

Resolution:

0.2 mm

Infill:

25%

Filament: eSun PETG