Nerf Rival Finisher Magazine Upgrade

This is a replacement tube that slides into the magazine for the Finisher. It enables the magazine to be opened, even with it empty. Simply unscrew the two screws on the top of the mag, and slide out the original tube, then replace with the printed one.

If your rounds are not feeding properly, sanding the notch on the inside of the part should do the trick.

How the part slides: https://youtu.be/zEIpIjwfMU0

Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

Resolution:

.2

Infill:

Doesn't Matter

Filament: Generic PETG (for layer adhesion)