Cotton bud container with screw lid

Object description:

My daughter wants to have everytime some cotton buds in her bag for cosmetic corrections.

For this reason I designed her a small container to transport a maximum of 7 unused and 7 used cotton buds.

Comments:

The container has a divider between used and unused sticks and a stamp for orientation on the outside. The inner height is 82mm for 80mm long buds. The files include already a layer height reduction for the thread.

The lid has an octagonal outer shape so that the tube does not roll away uncontrollably. The attached lid model is without her logo of course.

I've linked two lid versions. The best fit variant has no play in the thread and works good for me. In case it is too tight for you, use the lose fit variant. It is slightly bigger in X and Y direction.

If someone also has a need for such a container, here is the model for it.

Update 2023-07-09:

Version without divider and marking added on request.

Print settings:

Material: PETG, PLA or ABS/ASA

Layer height: 0,2mm, less for the threads

Infill: 15%

Perimeters: 3

Brim: no

Support: no