Kitchen/bathroom faucet 11mm wrench

Small wrench for 11mm nut which is used to hold kitchen or bathroom faucet.

For easier mount I also printed a 40mm bushing because threaded rod was very long.

I've uploaded few versions of this wrench. If you use bushing then it's probably OK to use short version. 

Short, 50mm, 65mm and 80mm version of the wrench.

Threaded rod - 8mm

Nut M8 11mm

Gcode file: 50% infill around the nut and 10% infill around upper part of the wrench for maximum saving of the filament. The part is very strong with these settings. 

PS. if you need 12mm version you can request it by comment.