Sony FS5 Grip Relocator

This is a handgrip relocation kit I made to fit onto standard 15mm LWS rails. It allows the camera to be used as an ENG-style camera when shoulder mounted.

The hand grip that comes with the camera sits somewhat in the same position that a handgrip from a traditional ENG lens would sit.

To construct you will need:

• Three M5 bolts of roughly 20mm length (8mm hex head)
• Three M5 wing nuts and three M5 washers
• One M6 bolt of roughly 25mm length (10mm hex head)
• Possibly 5mm and 6mm drill bits to drill out the holes to size if the bolts don't go through easily (depends on printer accuracy)
• A LANC extension cable. Smallrig makes one that works great.

Gently tap the bolts in place with a hammer.