Tri^2 (Update 03/14/19)

UPDATE 03/14/19:

1. If you are having trouble with Simplify 3D try the alternate Tri2-SharpRHI-V2.stl file
2. Added round corner version Tri^2-Rnd-Crnr.stl

This design is intended for corkscrew, vase mode, single wall printing.

I used Prusament PLA, and eSun Pla+.

.2mm layers. Use 5 or 6 bottom layers, zero top layers.

Use ballast for stability; marbles, small river rock.

You can also use 2 walls thick. 5 or 6 bottom layers, no top layers, no fill, for a sturdier and more water tight piece.