ThingPro - 3-Way Seflie Stick Hex Edition

I like the design of this selfie stick very much. Thank you misterjtc for sharing.
I changed it a little bit so you can use M5 (cap) hex nuts and hex bolts M5x30. No glue oder solder iron required.

I printed it in PLA. I had to sand the joint of the two extensions a little bit.
I did not print the handle yet. But I think it will fit.

Print Settings

Printer Brand:

Prusa

Printer:

i3 MK3

No

Supports:

Yes

0.15

Infill:

20%

Notes:

I used Slic3r PE 1.39.1rnThe stl of the two GpExtensions have errors. Slic3r could handle it. So be careful and check your Gcode before printing.rnrnPrinted in PLA.