Lengx Extended Butt Plate with Cutouts

Watch the original build video: https://youtu.be/jKdu9TzRMRw

Remixed these parts as part of a Lynx build I did. I wanted the extended butt, but I wanted it to be clean. The other half saw the cutouts in the print and asked if I could fill them in with another color. 20 minutes in TinkerCAD later, I had what I needed.

I used my slicer to scale the cutouts down by 1%. I used some 220 grit to smooth them out a bit so they could slide in easier. I secured them in place with a little Gorilla Glue.

Print Settings

Printer:

Prusa Mini

Rafts: 

No

Supports:

No

Resolution: 

0.2mm

Infill:

30%

Filament: Fillamentum PLA Vertigo Jade 
 

Notes: 

WHEN YOU PRINT THE CUTOUTS, SCALE THEM DOWN BY 1% IN YOUR SLICER

Category: Sport & Outdoors