Civetta Mountain

Introduction

This is a simple scale model of the Civetta, a famous Italian mountain. I did this by extrapolating the elevation data of the area from Google Earth, subsequently processing them with a special plugin The model aims to offer a good quality and fidelity of the buds, obviously with some approximation, if you have any advice or suggestions you can leave a comment :)

If you are interested in other peaks you can leave me a coffee in my paypal.me link and leave a comment with the name of the mountain, over time I will load other models

Printer Settings

The model can be made with every 3d printer with at least a 200*200 mm bed

For maximum quality and resolution I suggest to use 0.15layer height, 15% gyroid infill and a brim, especially if you don't have a Borosilicate glass (like ender 3) or a PEI steel sheet, the print takes about 48 hours with 0.15 QUALITY preset of the Prusa I3 MK3S

You can still use a classic glass plate (like that of the thinker SE in the picture), but a spray of lacquer becomes mandatory, otherwise the piece runs the risk of warping