Playseat Challenge Feet

Feet for the Playseat Challenge. Designed to fit some 50mm x 50mm glider or rubber pads. The glider allow me to easily move my seat around. The front feet can be fixed using zip-ties.

Important: I designed the feet of the seat with additional 15 mm rubber dampeners in mind. The font feet reach all the way to the floor. If you want it different, take care of the heights. I suggest using z-cuts in the slicer or add a cube to add height.

Print instructions

Material: PETG or PLA
Perimeters: 3 or 4
Layer height: 0.20 mm
Infill: 20 %