Holder for Jabra Evolve 40
Headset holder for the Jabra Evolve 40 to screw onto a table top up to 3.5cm thick.
10
62
1
481
updated September 28, 2023
Description
PDFThere are 5 parts that need to be printed.
The "holder" is pushed onto the "clip".
Then the "screw" is screwed into the "clip".
Finally, the "cap" is screwed onto the "screw" with an M3 countersunk screw (8-18mm long).
Everything can be printed without support.
Model origin
The author marked this model as their own original creation.
