Fillet & Chamfer TEST

Print With PLA or PETG, 5% infill. Stl is built to add in Prusa Slicer in all 3 positions.

I also added STL file only for 1 part to get only position you need.

Every part is marked how it was printed and which level it has.

Fillet and Chamfer on square 10mm x 10mm

Levels on each part are 0,2mm, 0,5mm, 1mm, 1,5mm, 2mm, 2,5mm, 3mm 

It is best to print in all 3 orientations to get a picture in which position your Fillet or Chamfer will get better results and compare the size of them.
 

This print helps you to know how to turn your 3D model to get the best result for the edge you need.