Vidroc 360: Samsung Gear VR Edition

Vidroc 360: Samsung Gear 360 edition.

1.30.19 - added 54mm adapter (and one with fins of course)

38mm and BT50 adapters

The camera snaps firmly into the mount - no retaining screw is needed unless you want to recover your booster with the camera, then you can drill out the base and run an eye-bolt up to the camera's threaded base.

Obviously, for those of you not wanting the cute forward fins, there are adapters without them.

The chamber below the camera allows you to add a PerfectFlite Firefly.

The camera clip has a 2mm hole through the top to allow you to attach a parachute line and there is a notch in the should of the adapter to help keep the line from binding on the airframe.

Use a plastic zip tie to secure the clip to the camera. When you want to activate the camera simply roll the clip to the side to gain access to the buttons.

I will be adding more body tube adapters as things progress.

Note*If you have a body tube you would like a mount, supply me with an STL of tube that will fit inside your body tube and I'll tweak the design to fit.*