Star Wars TIE Interceptor

Replica of a TIE/IN interceptor at 1:270 scale.

Its 42.4mm long, 29.9mm wide and 26.6mm tall.

For a stand/holder, its compatible with a slanted pin, peg and small base from here.

Print instructions

Printed at 0.07mm layer height. Rotate by -90° along the x-Axis before slicing.

Needs support on buildplate.

The wings can cause some stringing.

If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#