Rainbow Cup Badge Silph Arena PVP

Badge for the June Rainbow Cup in the Silph Arena PvP

Designed to be printed at 0.15mm or 0.1 layers due to the steps for each colour so that they get 2-3 layers in each colour.

This can be printed using a single colour 3D printer by doing a filament change inbetween where it starts each layer. If you have a multicolour attachment you'll likely need to swap the first couple filaments part way through so that it can get to printing filaments 6 (Red) and filament 7 (Purple)

Finished Badge size is 31mm x 27mm x 2.5mm (I'm printing it at 96% scale though so it ends up in the 30mm size that i usually design for.

The 6 colour printer version is the one that has the stripes vertical in each colour but this can only be printed by a 3D printer that can swap between 6+ Filaments of which I'm not aware of any, or be printed as separate pieces and glued together.

Print Settings

Printer Brand:

Prusa

Printer:

i3 MK3 MMU 2

Doesn't Matter

Supports:

Doesn't Matter

.15

Infill:

10