Prusa Printers Refrigerator Magnet - Single Extruder non MMU

This Prusa Printers refrigerator magnet prints fast in 32 min, has 3 color layer changes, and make a small decorative model of your printer. 

As the black circular base prints you can see the hole for the magnet. (10 min time for this color)

The lettering is fun to watch as it quickly prints out ‘Prusa Printers’ in a single extrusion line which is very crisp.  (4 min time for this color)

The third color is the Printer which shows details like the extruder/fan, console/dial, and filament spool. It also demonstrates the printers nice bridging ability for the two horizontal printer bars. (18 min time for this color) 

In the end you will end up with a nice piece that can be used a strong functional refrigerator magnet to give away. 

Minimum thicknesses and sizes were tested for speed and strength and lettering quality. Use a .25 layer height. To add the color changes in  your sliver: base (layers 1- 5), letters (layers 6-8), printer (layers 9+). I used Black and White Inland (Microcenter) PLA, and silver Prusament PLA. 

I used Loctite Super Glue Ultragel control and cheap DIYMAG Refrigerator Magnets 10x3mm (10x2mm would be flush and also work).

The alternate ‘embedded’ version includes an additional pause at layer 17 to let you place a  10x3mm magnet in an exposed internal cavity so no glue is needed and they are hidden.