"Leaf" Shaped Corner Templates in Various Sizes

These 16 corner templates are an extension to the LR2180 basic rounded corner set you can find here: Corner Templates for Flush-Trim Bits. I call them “leaf” shaped corners, see the drawing of how these corners are constructed.

All the information you find on the linked page is true for these templates. Also, the guides will work this these templates too.

Dimensions and Sizes

There are 8 sizes with two variants each. You will find all available measurements in the following drawing:

The variant number 2 or 3 is simply the factor by which the distance A is multiplied to build the radius B.

How to Print the Templates

If you are using a Prusa Printer, there is an example project for PrusaSlicer ("LR2180-E100-3 Print.3mf").

• Print the template with PLA (or PETG).
• Select 0.2mm layer height.
• Use the quality setting.
• Print with 3 perimeters to get better rigidity (especially if you use PETG).
• The flat side of the model goes to the printer bed.
• Do not scale the model!

If you like the models, please rate them and leave a comment below. 😄

Explore More from Meti·kumi

Interested in my designs? Browse through my collection of 3D models:

👉 https://metikumi.com/3d-models/

Stay connected on social media for the latest updates and work-in-progress insights:

👉 https://metikumi.com