MTG command zone with life counter

A command zone with room for a standard size commander and a manual two digit life counter.

The stl has tolerances big enough to print with a Davinci Jr. 1.0 with 0,4 mm nozzle (and some for the cover)

The number rotors are a dumbed down version of https://www.thingiverse.com/thing:1290507

Print Settings

Printer Brand:

XYZprinting

Printer:

da Vinci Jr. 1.0 Pro

No

Supports:

No

Post-Printing

While the rotors should click in place the cover has a bigger play and must be glued on, the numbers of the life counter will be hard to read unless highlighted with a permanent marker (i used white)