Mini Toy Combine

Hi, this is my mini, multi-piece toy harvester-combine that you can assemble and take apart! There are a total of 23 pieces. Assembly is very easy and requires no glue. The wheels and the chopper blade all spin, and the boom arm is able to rotate.The rough size of the combine is 150mm x 55mm x 85mm.

The total approximate print time for me was 13 hours. This was at 15-20% infill (depending on the part) and 0.2mm layer height. All the STL files are in the correct printing orientation. Supports are only needed for the Boom_Connector and Boom_End parts.

Print 2 of these parts....

• Big_Wheel
• Big_Wheel_Connector
• Small_Wheel
• Small_Wheel_Connector
• Brake_Lights

  Print Settings

Printer Brand:

Prusa

Printer:

i3 MK2S

No

Supports:

No

0.2mm

Infill:

15%

Notes:

Only the Boom\_End and Boom\_Connector need supports!rnrnPrint 2 of these parts....rn- Big\_Wheelrn- Big\_Wheel\_Connectorrn- Small\_Wheelrn- Small\_Wheel\_Connectorrn- Brake\_Lights