Realistic Oreo container (1:1 Mega Stuf Oreo)

Credits 

This is a scaled-down version of the design from hutchyx to match the diameter of a real Oreo (4.44 cm). It is also inspired by the scale-down version of IXPatch but maintains the original thread (since the simplified thread seems to get too loose after a while IMHO).

Description

The diameter of this print is exactly the one of Oreos, the only difference from a normal one is that the filling is higher, so it will look more similar to a “Mega Stuf” version. Realistically if the filling was one of a normal oreo, it wouldn't fit much inside :) so this will fit some pills and small items. 
The container inside is about 8mm high x 35mm in diameter.

Print instructions

Print 2x cookies in one color (generally a dark one like black) and each filling in another color (generally a light one like white) but you can go crazy on the colors :D 
You can glue the fillings with superglue or anything that works with PLA.

Filament used: (Cookie) Prusament PLA Galaxy Black, (Filling) Marble PLA.
Infill: (Cookie) 10% Gyroid, (Filling) 0%.
Thickness: Standard 2 perimeters.
Layer height: 0.15mm on 0.4mm nozzle.
Support: (Cookie) Needs support under the cookie since there is a groove that doesn't sit on the bed, (Filling) No support.