Rasberry Pi HQ Camera Stand

I used the holder with the Raspberry Pi wide-angle lens with a focal length of 6 mm. See technical drawing for exact dimensions.

Print

• PLA
• 0.2 mm layer height
• printed as four pieces
• joint 2 w/ support
• 20% infill

Additional material

• M2x 8 mm with hex nut (4 pieces)
• M3x12 mm with hex nut (3 pieces)
• M3x16 mm with hex nut (1 piece)
• 3mm wood screws (2-4 pieces)
• 2 mm and 3 mm drill

Post-processing

• drill hole

If you like the model buy me a coffee :)