Cuisinart DBM-8 Burr Grinder Coffee Measuring Spoon Holder

This is a remix of the spoon holder by DanLuc: https://www.thingiverse.com/thing:994032.

My Cuisinart DBM-8 Burr Grinder has a measuring spoon that is 18mm wide on the handle/brush end. The spoon would not fit into the original model (iirc it has ~15mm opening), so I made some adjustments to get the fit where I wanted it.

This remix's dimensions are as follows:
X - 24.5mm
Y - 20.63mm
Z - 15.47mm
These values represent a scale factor of 128.95% (based on the original model).

Attaching to DBM-8:
My DBM-8 does have magnetic sides. The magnet hole on this remix is ~8mm, which is larger than the hole on the original model. I printed this model with supports to account for the increased size, but I did not test or use magnets to attach the holder to my DBM-8. Instead, I attached using 3M double-sided mounting tape. It's still holding firm after a couple days.

Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

No

Supports:

Yes

0.2mm

Infill:

5%