Headphone Stand Treble Clef

If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free.

https://paypal.me/muddymaker

I present to you a headphone stand shaped like a treble clef.

I recommend printing the base with a minimum of 3 perimeters and 30% infill for stability.

For the treble clef I recommend printing with a minimum of 3 perimeters, infill is optional, as demonstrated in the photos of the glow in the dark one I made which has zero % infill. If you choose to do the same just make sure you print yours with at least 5 top and bottom layers and a minimum of 3 perimeters.

NO SUPPORTS required, files are in the correct orientation for printing. The treble clef is the largest part at 230mm, which should fit most 3d printers diagonally.

How to assemble video https://www.youtube.com/watch?v=uiEbLw4jTbI

Print instructions

NO SUPPORTS needed.

Happy printing.