XYZ test cube 20 mm in FilaFlex40

My first test print with FilaFlex40 after 2x failed phone case prints. Successful with brim, X-nozzle and max. 20 mm/s speed anywhere.

Print instructions

The nice cube printed in FilaFlex40 from Filatech. It´s quite chalenging filament. It failed the first time after detaching from the table close to the end. With the brim it went flowless. I have changed the speed to 20 mm/s max everywhere. Anything else standard Prusa. The nozzle is X-nozzle with 0.4 mm diameter. I didn´t find much information about the setting for the applied filament. And the standard settings didn´t work fine.