IR thermometer gun holder

This is a holder or rack to hold an IR thermometer gun. The brand I have is a Etekcity Lasergrip 774 Non-contact Digital Laser Infrared Thermometer Temperature Gun , but I see these sold under a variety of names on Amazon and elsewhere.

I made 4 versions, with different mounting options. Top mount is meant to be mounted underneath a flat surface. Face mount is to be mounted with the laser end onto a surface. Left and right mount respectively.

Print instructions

Category: Tool Holders & Boxes Summary

This is a holder or rack to hold an IR thermometer gun. The brand I have is a Etekcity Lasergrip 774 Non-contact Digital Laser Infrared Thermometer Temperature Gun , but I see these sold under a variety of names on Amazon and elsewhere.

I made 4 versions, with different mounting options. Top mount is meant to be mounted underneath a flat surface. Face mount is to be mounted with the laser end onto a surface. Left and right mount respectively.

Print Settings

Rafts:

No

Supports:

No

</div>Resolution:

.30

Infill:

20%

</div>
Filament:
Any Any solid material Any

Notes:

I printed this using overture PETG on draft settings a .3 mm height with 20% infill. No supports are required.

I do recommend using 3 perimeter layers, else the friction tabs can print funny if there is not adequate infill. If you use 2 layers, consider reviewing and changing your infill to make sure this section prints ok.