Raspberry PI - SATA SSD Joiner

This is a parametric design of a Raspberry PI 1 Model B+ SSD Joiner developed in Freecad, and the source code is here:

https://github.com/christiangda/3d-printing-rpi-ssd-joiner

I used this to configure my Octoprint configuration for my Prusa MINI and integrate this into my Ikea PAX

Print instructions

NOTE: Use prusaslicer adaptive layer height, because the M2.5 screw holes needs definition

Print setting:
0.20mm QUALITY

Filament:
Prusament PLA

Printer:
Any 3d Printer, I'm using a Prusa MINI

Support:
None

Infill:
20%